sensor_table_at_revision.csv GliderSN: The glider serial number of the glider to which the dissolved oxygen sensor is attached. Month: The month in which the lab calibration was performed. Day: The day in which the lab calibration was performed. Year: The year in which the lab calibration was performed. MissionID: The glider mission associated with the calibration. Type_0_pre_1_post_3_test_: The calibrations are labeled as being either pre-deployment, post-deployment, or tests. Options are 0, 1, and 3. 0=pre-deploy. 1=post-deploy. 3=test. DOX63SN: The serial number of the dissolved oxygen optode, from Sea-Bird. Offset_air: Calculated offset for the in-air full saturation reading. Gain_air: Calculated gain for the in-air full saturation reading. ZeroValue_ml_l_: The averaged measured value over the 5-minute observation window at zero oxygen. Offset: Calculated offset for the in-water full saturation reading. Gain: Calculated gain for the in-water full saturation reading. AirTemp: Mean temperature during the in-air calibration, in degrees Celsius. sigAirTemp: Standard deviation of temperature during the in-air calibration, in degrees Celsius. ZeroTemp: Mean temperature during the zero-oxygen calibration, in degrees Celsius. sigZeroTemp: Standard deviation of temperature during the zero-oxygen calibration, in degrees Celsius. Temp: Mean temperature during the in-water full saturation calibration, in degrees Celsius. sigTemp: Standard deviation of temperature during the in-water full saturation calibration, in degrees Celsius. Datenum: Date in Matlab date format. Elapsed: Number of days since factory calibration at Sea-Bird. Storage: The rate of change of gain during storage, in unit per day. Deploy: The rate of change of gain during deployment, in unit per day. sensor_factory_table.csv DOX63SN: The serial number of the dissolved oxygen optode, from Sea-Bird. Date: The date of factory calibration of the optode oxygen sensor. Datenum: Date in Matlab date format. sensor_table_CalCOFI_gain.csv DOX63SN: The serial number of the dissolved oxygen optode, from Sea-Bird. Gain: Gain determined by comparison of glider dissolved oxygen to hydrographic casts from the California Cooperative Oceanic Fisheries Investigations (CalCOFI) program. Datenum: Date in Matlab date format. Elapsed: Number of days since factory calibration at Sea-Bird.