Conductivity, temperature and pressure, data from the EGIM deployed on EMSO-Azores observatory, 2017-2018

This dataset contains conductivity, temperature and pressure data acquired between July 2017 and August 2018 on EMSO-Azores observatory by the EGIM. These are 3 of the 7 core parameters monitored by the EGIM, EMSO Generic Instrumental Module.

The EGIM prototype was deployed at Lucky Strike hydrothermal vent site, 25 m south west of the active edifice Tour Eiffel, to monitor local hydrodynamic variability and complement the data obtained by the numerous sensors set on this site: oceanographic mooring deployed south of the vent field, the multidisciplinary Seamon East node, autonomous current meters, array of temperature probes…

Disciplines

Physical oceanography

Keywords

Mid-Atlantic Ridge, EMSO-Azores, Lucky Strike, Conductivity, salinity, pressure, Temperature, CTD, EGIM, Time-series, MoMAR, MoMARSAT2017, EMSOdev, EMSO

Location

37.30134N, 37.2888S, -32.275618E, -32.27982W

Devices

Parameters

  • Sea water temperature  (°C)
  • Sea water practical salinity (psu)
  • Sea water pressure (dbars)
  • Sea water electrical conductivity (S/m)
  • QC

Location

  • Regional node: Emso-Azores
  • Site: Lucky Strike
  • Node: EGIM
  • Coordinates: N37° 17' 19.61'' and W32° 16' 33.06''
  • Depth: 1700 m

Installation

Recovery

Operating parameters

  • Measurement duration: 10 sec
  • Sampling period: 15 minutes
  • Anti-fouling device: AF24173 Anti-Foulant Device

Sensor metadata

Test and calibration

  • SEABIRD, Standard calibration (September 2016)
  • SEABIRD, Specific pressure test (August 2016)
  • Ifremer, Temperature calibration n°M-DCM-17-088 (June 2017)
  • Ifremer, Salinity calibration n°M-DCM-17-089 (June 2017)
  • Ifremer, Pressure qualification (Mai 2016)
  • Ifremer, Pressure test (October 2016)

Data management

  • Real time data transmission: No
  • Data storage in the Communication and storage unit (COSTOF2): Full
  • Data storage in the instrument: No

Data

FileSizeFormatProcessingAccess
Raw data (CSV format)
1 MoCSVRaw data
Sensor configuration
57 KoIMAGE
Sensor standard calibration
289 KoPDF
Sensor 16 pressure calibration
11 KoPDF
Temperature calibration report
212 KoPDF
Conductivity calibration report
294 KoPDF
Pressure qualification report
144 KoPDF
Pressure test report
130 KoPDF
Raw data (NetCDF format)
299 KoNetCDFRaw data
How to cite
Sarradin Pierre-Marie, Legrand Julien, Moreau Bertrand, Lanteri Nadine, Cannat Mathilde (2018). Conductivity, temperature and pressure, data from the EGIM deployed on EMSO-Azores observatory, 2017-2018. SEANOE. https://doi.org/10.17882/56528

Copy this text